Gas and Liquid Flow Gauges
Grainger Dial Inflator Gauge 6 ft
The Haltec Dial Inflator Gauge is a dial-type tire pressure gauge used to measure tire pressure. It has a 2.5 inch dial with a dual calibrated scale that reads 0-60 psi and 0-4.1 bar. The gauge has a rubber hose, chuck, and bleed button. It can test pressure in tires, balls, air mattresses, and more. This analog gauge is compact and easy to use. The large dial provides an easy-to-read display to accurately check pressure.
Cole-Parmer Ashcroft 1032S2.0 2" Sanitary Pressure Gauge 30 psi, 3/4" Tri-Clamp
The Ashcroft Type 1032 Sanitary Pressure Gauge is specifically designed for applications in the food, pharmaceutical and biotechnical industries where small size and sanitary conditions are a priority. This compact autoclavable 2" gauge features all stainless steel construction, temperature-vented case, built-in pressure dampening and a self-draining case to facilitate wash downs. The gauges can also be cleaned or steamed in place.
Grainger G3261 Level Gauge HDPE D 69in
The Grainger 16N335 is a 16 oz. dead blow plastic hammer with a 2-1/2 inch diameter striking face. It has a hollow head filled with steel and lead shot to prevent rebound and absorb shock. The hammer has a fiberglass handle that provides durability. This general purpose hammer allows the user to deliver heavy blows without marring the striking surface and is well-suited for assembling equipment or driving machine parts without damage. The hammer weighs approximately 1.6 lbs.
Grainger G3257 Therma Level Gauge HDPE D 23in
The Grainger 16N620 is a 16 oz. dead blow plastic hammer with a 2-1/2 inch diameter striking face. It has a hollow head filled with steel and lead shot to prevent rebound and absorb shock. The handle is made of fiberglass reinforced nylon for durability. This hammer allows you to strike delicate surfaces like aluminum, plastic, or glass without damage. It is well-suited for automotive, industrial, and construction applications. The total length is 12 inches.
Foxx Life Sciences EZBio Ultra Minipure Sterilizing Grade Capsule Filter, 0.2µm Pore Size, Double-Layer PES, 1.86 ft² EFA, 0.75" Sanitary Inlet/Outlet, 4" Height, Silicone O Ring, Gamma Irradiatable, Autoclavable, Non Sterile, 4/CS
EZBio Ultra Capsule Filters are sterilizing-grade capsule filters engineered for exceptional control of microorganisms in sterile fluid applications. Available in sizes from 2” to 40”, these filters offer versatile inlet/outlet options—including hose barbs, female NPT & sanitary connections—for seamless integration in bioprocess & pharma
Features
Retention: 100% of Brevun- dimonas diminuta (ATCC 19146) at ≥10^7 CFU/cm² EFA
Ultra-pure polypropylene housing & asymmetric hydrophilic PES membrane ensure low protein binding & minimal extractables
Multi-pleated configuration maximizes surface area for enhanced flow & durability
Compliant with FDA CFR 21 & USP Class VI Standards
Tested & comply with the requirements of USP <665>
Autoclavable: 20 times for 1 hour@257°F & ≤ 3psi
Gamma Irradiatable: 27.5–56 kGy
Application
Buffer & sample prep
Cell culture media prep, protein purification
High-purity chemical filtration
Chemglass Life Sciences Pressure Relief/Check Valve, 1/4in Hose Barbs, Polypropylene, Viton Seals, 3psi
1/4" Hose Barb Check Valve, 3 psi Cracking Pressure 302 Stainless Steel Spring, 316 Stainless Steel Ball, Viton Seals, Natural Polypropylene.Safety is paramount when working with glass vessels that see pressure.Hydrophobic vent filters can become blocked due to moisture form the vessel contents. This results in a higher-than-normal back pressure and an increased chance for the vessel or other system components to fail.The pressure relief valve should be used in situations where the glass vessel could see pressure.The valve is a one-way or non-return device to let gas flow in one direction above a fixed pressure level.It is attached by silicone or comparable tubing to one of the vessels head plate ports. If the pressure inside the vessel reaches 3 PSIG, the valve will open and then close when the pressure falls below 3 PSIG.The housing cannot be opened nor can the pressure setting be adjusted.
Grainger G3262 Level Gauge HDPE D 77in
The Grainger 77" Liquid Level Gauge is designed for use in 77" deep containers to visually indicate liquid level. It features a clear polycarbonate body to provide a wide viewing window and allow users to easily monitor liquid levels. The gauge attaches via a 3/4" NPT connection and is made of chemical resistant materials for compatibility with various liquids. With no moving parts, this model offers a maintenance-free way to monitor tank fill levels. The 77" length is ideal for common 330 gallon IBC totes.